For the novice, excavator lifting is a very dangerous operation, the following places to pay attention to be sure to remember!

1. Safe lifting to prevent slipping

General bucket behind there is a hook, with here lifting is the most secure, especially need to lift the object to a certain height, if the rope hanging in the bucket teeth, in the process of lifting is easy to slip. The use of hooks ensures that the rope will not slip off, and is the most recommended safe lifting method.

When the object to be lifted is very close to the excavator, it is very suitable to use the bucket teeth to lift the object directly. In addition, if the distance to be lifted is not very high, it is also very convenient and efficient to use the bucket tooth hook.

2. Stable lower disc to prevent rollover

Stable body is the precursor of efficient and safe operation! When lifting the excavator must stand on a horizontal stopping surface; if you have to lift objects on an inclined surface, you can first dig out a horizontal stopping surface. The direction of the excavator chassis is also very important, the smaller the angle between the lifting direction and the direction of the chassis track the safer the excavator is, the larger the angle the more likely to cause the excavator to tip over.

When the excavator is lifting, it is actually a lever state, always pay attention to the distance from the centre of gravity of the lifting object to the centre of gravity of the excavator. The closer the lifting object is to the excavator's centre of gravity, the safer the excavator is, and the lifting capacity can be maximised; the further the lifting object is from the excavator's centre of gravity, the greater the danger of the excavator tipping over, and the more restricted the excavator's lifting capacity is.

3. Reasonable operation safety first

Lifting objects is to pay attention to, do not need to lift too high when must not lift too high, once the excavator has the danger of tipping, to the first time to lower the big arm, will be lifting the object quickly on the ground.

The last point, is to ensure that there is no personnel in the vicinity when lifting, before lifting to ensure that the lifting rope is vertical, to prevent collision casualties.