The use of any equipment or instruments requires first of all attention and attention to details, so as to more effectively ensure the good usability of the equipment. 

Regarding the precautions for driving loaders in winter, this point is It is very important, so let’s take a look at it together today.

1. It is relatively difficult to use vehicles in winter. It is recommended that each start should not take more than 8 seconds. If it cannot start, you should loosen the starting switch and wait for 1 minute after stopping before starting the second time. 

After the engine is started, firstly, charge the battery, secondly, make the water temperature reach 55℃ and the air pressure meter reach 0.4Mpa, and then start driving again.

2. Generally, when the temperature is below 5℃, water or steam should be heated for preheating before starting the engine. Wait until the preheating reaches above 30~40℃ before starting.

3. When the temperature is below 0°C, the cooling water in the water tank drain chamber, engine, oil cooler and torque converter oil cooler should be drained out after every day's work to avoid freezing and cracking; 

there is water vapor in the air reservoir, which is frequently discharged. Prevent freezing, which may cause brake failure. If antifreeze has been added, do not release it.

As for the precautions for driving loaders in winter that we have introduced above, we hope that they can help you drive well, so as to more comprehensively ensure the good applicability of the vehicle.